i series Version History
Copyright © Speakerbus Technology Ltd. All Rights Reserved.
This document describes the features introduced by each
release, so far as has been recorded. Information about each
release can be reached quickly by following the links provided.
To follow a link, simply click on it.
- Version 3.210.1.0 (iG114)
- Version 3.200.3.0 (iD100, iD101, iD114, iG114, iG124, iG214)
- Version 3.200.2.0 (iD100, iD101, iD114, iG114, iG124, iG214)
- Version 3.200.1.0 (iD100, iD101, iD114, iG114, iG124, iG214)
- Version 3.100.3.0 (iD100, iD101, iD114, iG114, iG124, iG214)
- Version 3.100.2.0 (iD100, iD101, iD114, iG114, iG124, iG214)
- Version 3.100.1.0 (iD100, iD101, iD114, iG114, iG124, iG214)
- Version 3.001.1.0 (iD101, iD114, iG114, iG124, iG214)
- Version 3.000.10.0 (iD101, iD114, iG114, iG124, iG214)
- Version 3.000.9.0 (iD101, iD114, iG114, iG124, iG214)
- Version 3.000.8.0 (iD101, iD114, iG114, iG124, iG214)
- Version 3.000.7.0 (iD101, iD114, iG114, iG124, iG214)
- Version 3.000.6.0 (iD101, iD114, iG114, iG124, iG214)
- Version 3.000.5.0 (iD101, iD114, iG114, iG124, iG214)
- Version 3.000.4.0 (iD101, iD114, iG114, iG124, iG214)
- Version 3.000.2.0 (iD101, iD114, iG114, iG124, iG214)
- Version 3.000.1.0 (iD101, iD114, iG114, iG124, iG214)
- Version 2.300.9.0 (iD101, iD114, iG114, iG124, iG214)
- Version 2.300.5.0 (iD101, iD114, iG114, iG124, iG214)
- Version 2.300.4.0 (iD101, iD114, iG114, iG124, iG214)
- Version 2.300.3.0 (iD101, iD114, iG114, iG124, iG214)
- Version 2.300.1.0 (iD114, iG114, iG124, iG214)
- Version 2.200.6.0 (iD114, iG114, iG124, iG214)
- Version 2.110.6.0 (iD114, iG114, iG124, iG214)
- Version 2.100.4.0 (iD114, iG114, iG124, iG214)
- Version 2.000.23.02 (iD114, iG124)
- Version 2.000.23.0 (iD114, iG124)
- Version 1.001.1.02 (iG114)
- Version 1.001.1.0 (iG114)
- Version 1.000.167.0 (iD114)
- Version 1.000.165.0 (iG114, iG124)
Version History
New Features Added in Version 3.210.1.0
- Security improvement to remove Qualys QID 82005 (Predictable TCP Initial Sequence Numbers)
- Security improvement to remove Qualys QID 82054 (TCP Sequence Number Approximation Based Denial of Service). RFC 5961 sections 3.2 & 4.2 implemented.
- Security improvement to remove Qualys QID 11827 (HTTP Security Header Not Detected)
Defects Resolved in Version 3.210.1.0
- Crash caused by an HTTP GET of a filename that is greater than 50 characters long (F0038518)
Known Defects/Issues in Version 3.210.1.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
- The iD114 display is not updated correctly if a user is seated via iManager while
the device is in the menu (F0028389)
Back to the Contents
New Features Added in Version 3.200.3.0
- WAN recovery mode enhanced to also trigger when only RTP traffic is lost
Defects Resolved in Version 3.200.3.0
- No problems resolved with this release
Known Defects/Issues in Version 3.200.3.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
- The iD114 display is not updated correctly if a user is seated via iManager while
the device is in the menu (F0028389)
Back to the Contents
New Features Added in Version 3.200.2.0
- Push-to-talk private wire mode
Defects Resolved in Version 3.200.2.0
- WAN recovery period is not displayed correctly on the i-series device setup web page. It
always displays 60 seconds instead of the configured setting (F0027702)
- Several PTI commands, including the WAN recovery period, do not validate the numbers correctly (F0027719)
- The PTI command "WAN STREAM 1/2/3/4 PORT xxxxx" does not update the port setting. (F0027744)
- The PTI command "LAN CH1/CH2/CH3/CH4 PORT xxxxx" does not update the port setting for channels 2 to 4. (F0027746)
- When the "WAN recovery mode" is configured to 1 second the summary configuration page reports "1 seconds"
instead of "1 second" (F0027751)
- The Summary Configuration web page does not show the port number for a WAN channel that is reported
as unreachable (F0027824)
Known Defects/Issues in Version 3.200.2.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
Back to the Contents
New Features Added in Version 3.200.1.0
- WAN recovery mode
- Auto-locate via DHCP
- Automatic level reduction functionality added to the iD114
- On-speaker setting made non-volatile
- Community string for SNMP traps made configurable
- Audio loop production tests enhanced by disabling voice switching during the tests
Defects Resolved in Version 3.200.1.0
- Incorrect length field in SNMP traps with variable bindings (F0027304)
- G723 WAN packets are 2 bytes too short (F0027457)
Known Defects/Issues in Version 3.200.1.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
Back to the Contents
New Features Added in Version 3.100.3.0
- No new features added in this release
Defects Resolved in Version 3.100.3.0
- An audio burst can be heard even though a channel is set to mute while receiving
on a higher priority channel (F0014334)
Known Defects/Issues in Version 3.100.3.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
Back to the Contents
New Features Added in Version 3.100.2.0
- No new features added in this release
Defects Resolved in Version 3.100.2.0
- iD100 WAN receive is disabled when enabling a WAN stream using the same multicast address
as a previously enabled LAN stream (F0014094)
- Periodic hardware check of DAC not performed causing loss of audio during electro-static
discharge test (F0014295)
Known Defects/Issues in Version 3.100.2.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
Back to the Contents
New Features Added in Version 3.100.1.0
- Full support of new iD100 deskstation
Defects Resolved in Version 3.100.1.0
- Some characters such as a ¥ are not displayed correctly on the web page/display when sent from
i cms (F0010351)
- When resetting a device via the web page using Firefox v3.0 the web page does not reload once
the device has restarted (F0013623)
- The voice activity indicator for a MRD call incorrectly overrides any ringing indication being
shown on the LED indicator for the channel (F0013990)
Known Defects/Issues in Version 3.100.1.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
Back to the Contents
New Features Added in Version 3.001.1.0
- No new features added in this release
Defects Resolved in Version 3.001.1.0
- When using command-line PRODTEST LAN & PRODTEST WAN the iseries device requires
a full feature key to enable these tests to be run. It should be possible to run these
tests without any feature keys (F0013744)
Known Defects/Issues in Version 3.001.1.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
Back to the Contents
New Features Added in Version 3.000.10.0
- No new features added in this release
Defects Resolved in Version 3.000.10.0
- There is a problem in the RTCP receiver reports where the incorrect SSRC is used. This
causes a problem when connecting to the iD808/iG330 (F0012551)
- An invalid multicast address can be entered which is outside the range supported by
i cms. Range should be 224.0.1.0 to 239.255.255.255 but values from 224.0.0.3
can be entered (F0013268)
Known Defects/Issues in Version 3.000.10.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
Back to the Contents
New Features Added in Version 3.000.9.0
- The privacy operation has been modified so that the privacy state only affects the local
users and does not affect the privacy state of the far end users (CN2590)
Defects Resolved in Version 3.000.9.0
- No problems resolved with this release
Known Defects/Issues in Version 3.000.9.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
Back to the Contents
New Features Added in Version 3.000.8.0
- No new features added in this release
Defects Resolved in Version 3.000.8.0
- WAN connection problems with LAN-Mixing on the iG114 & iG214 when using iManager / i cms.
This problem occurs after setting up the device for Lan-Mixing and then attempting to setup
WAN connections from the same gateway, which then fail (F0012186)
- When sending a profile download request to an iSeries device that contains the test tones, the
device responds with a profile update message when it shouldn't. (F0012208)
Known Defects/Issues in Version 3.000.8.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
Back to the Contents
New Features Added in Version 3.000.7.0
- No new features added in this release
Defects Resolved in Version 3.000.7.0
- Not all active streams are listed when using the PTI STATUS command (F0011704)
- With global muting enabled, putting a channel on hold still transmits the muting signal and plays
receive audio even when other desk stations are prime users (F0012011)
- When global muting is enabled for an MRD channel and a desk station is receiving the muting signal
and a user from the far site rings the channel, the red LED does not change to the ringing mode
and stays blank (F0012012)
- Changes to the global muting signal received are not monitored when in the privacy pending state for
ARD and MRD calls (F0012013)
Known Defects/Issues in Version 3.000.7.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
Back to the Contents
New Features Added in Version 3.000.6.0
- Change in the operation of local and global muting (CN2566)
- FPGA enhanced to support setting and reading bits in the second byte of the control word in
SbRTP packets (CN2566)
Defects Resolved in Version 3.000.6.0
- The serial interface does not match the web interface for analogue gateways when LAN mixing is
enabled (F0011438)
- The serial interface does not match the web interface for merged gateways when enabling WAN
channels (F0011487)
- The PTI command LAN CH1 SBRTP ON or OFF does not work (F0011488)
- Improved checking when modifying conf modes, IP gateway modes, LAN mixer mode and WAN streams
via the PTI (F0011438,F0011487,F0011488)
Known Defects/Issues in Version 3.000.6.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
Back to the Contents
New Features Added in Version 3.000.5.0
- No new features added in this release
Defects Resolved in Version 3.000.5.0
- Signalling bits are not blocked between version 2.3 and version 3.0 WAN links (F0010888)
- Invalid or unavailable addresses are redirected to the default page when web access is read only (F0010994)
- Upgrading from 2.100.4.0 to 3.000.4.0 doesn’t force iCMS service to on (F0011044)
- The WAN gateway type cannot be changed via the web page (F0011172)
- The iG214 analogue line interface mode is not reported to iCMS when changed (F0011221)
Known Defects/Issues in Version 3.000.5.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
Back to the Contents
New Features Added in Version 3.000.4.0
- Device type and mac address are checked and validated in all requests from i
cms (F0010202)
Defects Resolved in Version 3.000.4.0
- SBRTP_VERSION changed to version 2.3 when defaulting and upgrading
- Device does not send a close socket request after a polling announce (F0010463)
- DNS query still made for disabled WAN channels (F0010316)
- Error messages appear on the PTI for the iD101 when changing the channel label
- Web page inconsistent when a WAN channel is disabled (F0010452/ F0010455)
- Global muting mode option removed when channel mode is set to Hoot (F0010511)
- iG124 sets the gateway type to internal when selecting hoot and the other devices
do not change it (F0010459)
- iD101 shows a problem on the profile page when GO is selected (F0010611)
- WAN communication between a version 2.3 device and a version 3.0 device is possible
even though WAN connection error is shown
Known Defects/Issues in Version 3.000.4.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
Back to the Contents
New Features Added in Version 3.000.2.0
- Voice switching functionality added to iD114 & iD101
- Modified operation for locating i cms server using DNS.
Now uses SRV server requests for _speakerbus-cms-1._tcp and
_speakerbus-cms-2._tcp to retrieve the FQDN of the primary
and backup servers
Defects Resolved in Version 3.000.2.0
- FPGA corrected when receiving multiple packets at the same time when set to 2 or 4 ms packets
- Handset side tone now reported in SETUP INFO on PTI
- Fix problem where conference port number can be set to 34463 when entering
99999 and pressing enter (F0010248)
- Fix problem where i cms can initiate a connection in the time between sending
a close socket and the device resetting causing i cms to wait a long time
after the device has started up before re-establishing a connection (F0010222)
Known Defects/Issues in Version 3.000.2.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
Back to the Contents
New Features Added in Version 3.000.1.0
- Compatibility with iD808
- Privacy support added
- Local and global muting support added to iD101 & iD114
- SbRTP variable packet size (1ms, 2ms & 4ms), VAD and additional
signalling byte functionality added (referred to as flexible SbRTP)
- V2.3/V3.0 configuration option. V3.0 mode for compatibility with iD808 and
to support privacy, muting and flexible SbRTP. V2.3 mode to interwork
with V2.3 version i series devices
- Handset side tone can be enabled/disabled for the iD114/iD101
Defects Resolved in Version 3.000.1.0
- Fixed bug where iD101 stops showing the ringing LED when audio is
received while ringing
- Correction of iD101 PTI command PRODTEST VERSIONS, which reported
application and downloader versions exchanged
- Fix iD101 PTI command PRODTEST CONTROLS, to correctly report changes
to switch and rotary pot values during the test
- Fix iD114 and iD101 PTI command PRODTEST CONTROLS, to correctly report
any switches which are closed at the start of the test
- Handset mode can be correctly set from i cms
- PRODTEST WAN corrected to save IP address in correct place
- iD101 profile page corrected to not show WAN channels 2 to 4 when relay
mode is selected
- Fix for iG124 going out of sync when changing LAN_MIXER_MODE (F00009405)
Known Defects/Issues in Version 3.000.1.0
- SNMP stats for ifOutNUcastPkts is fixed to 0 when SbRTP VAD is enabled
- Occasional web page hang when using 2ms or 4ms packets
- Occasional ARD call drop when using 2ms or 4ms packets
Back to the Contents
New Features Added in Version 2.300.9.0
- No new features added in this release
Defects Resolved in Version 2.300.9.0
- Device does not send a close socket after sending a polling announce after it has sent
an announce from autodiscovery (F0010463)
Known Defects/Issues in Version 2.300.9.0
- No problems outstanding with this release
Back to the Contents
New Features Added in Version 2.300.5.0
- Support for the latest SocketSLIC modules added with this release
Defects Resolved in Version 2.300.5.0
- No problems resolved with this release
Known Defects/Issues in Version 2.300.5.0
- No problems outstanding with this release
Back to the Contents
New Features Added in Version 2.300.4.0
- No new features added with this release
Defects Resolved in Version 2.300.4.0
- Unit info menu item removed from PTI and web page for the iD101
- Minor CMI bug resolved where the device does not start listening immediately after
sending an action
Known Defects/Issues in Version 2.300.4.0
- No problems outstanding with this release
Back to the Contents
New Features Added in Version 2.300.3.0
- Full support of new iD101
Defects Resolved in Version 2.300.3.0
- Announce triggered by AutoDiscovery sends the CloseSocket message twice (F00007445)
- Modify web pages can be accessed when in read only mode (F00006900)
- Speakerbus logo incorrectly provides a link in pop up windows
Known Defects/Issues in Version 2.300.3.0
- No problems outstanding with this release
Back to the Contents
New Features Added in Version 2.300.1.0
- WAN jitter buffer offset range increased from 10 to 180 in 10 milliseconds to 10 to 180 in
10 milliseconds and 200 to 500 in 50 milliseconds
- An announce message is sent to i cms after a configurable number of minutes to allow
i series units to be deployed behind NAT routers and still to be managed via i cms
Defects Resolved in Version 2.300.1.0
- G723 audio clipping problem resolved. The audio was being clipped when the talk button was released
- PROD TEST commands resetting the unit problem fixed
Known Defects/Issues in Version 2.300.1.0
- No problems outstanding with this release
Back to the Contents
New Features Added in Version 2.200.6.0
- i cms support
- Feature key licence code can now be entered through the setup web page
- Latched hoot timeout functionality added for iD114
- Support for mozilla firefox web-browser
Defects Resolved in Version 2.200.6.0
- SNMP stats does not include any packets filtered out by the FPGA
- Audio decoder unstable when the actual jitter buffer is greater than 560ms (actual
jitter buffer size limited to 560ms)
- WAN connection error when using a NAT router in PAT mode
- The status web page incorrectly reports an Ethernet interface error when no SbRTP
streams are enabled and the Ethernet mode is not 100M full duplex
Known Defects/Issues in Version 2.200.6.0
- G723 audio can be clipped when the talk button is released
- PROD TEST commands reset the unit
Back to the Contents
New Features Added in Version 2.110.6.0
- G723 support (controlled by a G723 feature key)
- Keep-alive interval
- SNMP network stats (MIB-II)
- WAN IP address host names supported using DNS
- iD114 display warning message for maximum taker limit for hoot channels
- SERVICE RESET command
- Automatic downloading of main application by upgrader
- WAN test tone
- VCM interworking
- 10Base-T Ethernet operation
- Command line interface control and status support for all options available via the web interface
Defects Resolved in Version 2.110.6.0
- No problems resolved with this release
Known Defects/Issues in Version 2.110.6.0
- SNMP stats does not include any packets filtered out by the FPGA
- Audio decoder unstable when the actual jitter buffer is greater than 560ms
- WAN connection error when using a NAT router in PAT mode
- The status web page incorrectly reports an Ethernet interface error when no SbRTP streams are
enabled and the Ethernet mode is not 100M full duplex
- G723 audio can be clipped when the talk button is released
Back to the Contents
New Features Added in Version 2.100.4.0
- Initial release for iG214
- V2.0 features added to iG114 including enhanced autodiscovery support, upgrader support,
IGMP querier, feature key support and merged IP gateway and relay operation
- Number of gateway devices per LAN conference increased to 8 of any type
- 1 conference to 4 remote sites (hub) IP gateway mode added
- 2 conferences to 2 remote sites (hub) IP gateway mode added
- LAN mixer mode added
- Internal WAN gateway mode added to extend ringdown networks beyond 2 sites
- Manual port numbering for IP WAN channels supported
- Analogue voice recorder mode added to iG114
- Diffserv support added
- Single channel feature key supported for iD114
- Configuration option added to suppress SbRTP transmission
- Improved security for the web interface and the RS232 serial interface
- Service commands added to allow the web interface, the API interface and the autodiscovery
services to be disabled as a security measure
- Ethernet interface configurable between the auto negotiation mode and manual set-up mode
- Enhanced diagnostics for reporting invalid WAN IP gateway configurations
- Enhanced diagnostics for reporting invalid Ethernet port connections
- CB microphone support added for the iD114
- Analogue port gain range extended down to -20dB for the iG114
Defects Resolved in Version 2.100.4.0
- No problems resolved with this release
Known Defects/Issues in Version 2.100.4.0
- No problems outstanding with this release
Back to the Contents
New Features Added in Version 2.000.23.02
- No new features introduced with this release
Defects Resolved in Version 2.000.23.02
- SNMP requests to a unit can result in a memory leak that over a period of time can cause a unit to reset
Known Defects/Issues in Version 2.000.23.02
- No problems outstanding with this release
Back to the Contents
New Features Added in Version 2.000.23.0
- ARD and MRD ringdown functionality added
- Support for a handset added to iD114
- User menu added to iD114
- 2 conferences between 3 sites IP gateway mode added
- 4 conferences between 2 sites IP gateway mode added
- Relay operation added
- Merge IP gateway functionality added to iD114
- IGMP querier functionality added
- Feature key support added
- Upgrader support added
- Enhanced autodiscovery operation added
- G729 audio coding mode added to IP gateway operation
- Production test routines added for iD114
Defects Resolved in Version 2.000.23.0
- No problems resolved with this release
Known Defects/Issues in Version 2.000.23.0
- SNMP requests to a unit can result in a memory leak that over a period of time
can cause a unit to reset
Back to the Contents
New Features Added in Version 1.001.1.02
- No new features introduced with this release
Defects Resolved in Version 1.001.1.02
- SNMP requests to a unit can result in a memory leak that over a period of time
can cause a unit to reset
Known Defects/Issues in Version 1.001.1.02
- No outstanding problems known with this release
Back to the Contents
New Features Added in Version 1.001.1.0
- Add audio input squelch level adjustment to the analogue inputs
Defects Resolved in Version 1.001.1.0
- No problems resolved with this release
Known Defects/Issues in Version 1.001.1.0
- SNMP requests to a unit can result in a memory leak that over a period of time can cause a unit to reset
Back to the Contents
New Features Added in Version 1.000.167.0
- Initial release for iD114
Defects Resolved in Version 1.000.167.0
- No problems resolved with this release
Known Defects/Issues in Version 1.000.167.0
- No outstanding problems known with this release
Back to the Contents
New Features Added in Version 1.000.165.0
- Initial release for iG114 and iG124
Defects Resolved in Version 1.000.165.0
- No problems resolved with this release
Known Defects/Issues in Version 1.000.165.0
- No outstanding problems known with this release
Back to the Contents